Preventative maintenance in the plumbing business can help homeowners avoid pricey repairs and utility expenses, despite the adage that prevention is preferable to cure. Here are seven fast recommendations for performing preventative maintenance on your home’s plumbing system.

Your plumbing system needs routine care, much like your lawn or garden does, to prevent minor issues from turning into major headaches. Your plumbing system will work at its best all year long if you do routine maintenance on it.

Professional Maintenance Contain

 

A qualified plumbing business will have a thorough plumbing preventive maintenance checklist. The following items will be included on the maintenance checklist:

• Examining the walls and the area near the cabinets for any evidence of water damage
• Examining the piping and pipes for evidence of rust or damage
• Make sure the toilets are functioning correctly and are not leaking
• Check to see if the faucets in the kitchen, bathroom, and other areas of the house have the appropriate water pressure.
• Examining potential obstructions
• Checking for damage or leaks in the water heater and garbage disposal
• Performing a pressure test to look for any pipe leaks or tiny hairline cracks
• Cleaning all drains using a drain snake

Occasionally, a qualified plumbing company will additionally include video pipe inspection and lead testing in the regular maintenance check. However, a routine maintenance check may not necessarily include these services.

Checklist for Plumbing Maintenance

Include the following items on your checklist for plumbing maintenance.

Clean All Your P-Traps & Drains

Spend a few minutes clearing out your drains of any debris every few months or whenever you notice that the water draining from your bathroom drains more slowly than usual (this is a symptom of a blockage). Contact a specialist if vinegar and baking soda don’t clear the obstruction. Regularly clean the drain in your kitchen sink as well. You can say the same with your P-traps.

Avoid Getting Hot-headed Over Your Water Heater

 

Have you ever received the finger from your water heater? It’s possible that silt accumulation has reduced the efficiency of your water heater.

Every year, you should drain and flush your water heater to get rid of the sediment to extend its lifespan and improve its functionality.

An annual check of the piping and shut-off valve on your water heater can detect any problems early.

Verify Any Slow Drains

 

Slow-moving drains could indicate more significant problems. How efficiently do your sinks, bathtubs, and showers drain water?

If your blocked drains in Melbourne aren’t moving, try flushing them with a hot vinegar and water solution.

If they continue to move slowly, you might have a blockage and require professional assistance.

By using force or chemicals to clear a clog, you run the danger of damaging pipes and making the situation worse. To prevent a clog, clean the drain P-traps under your sink, and utilize screens or drain baskets in the bathtub and shower.

Repair Leaky Bathroom faucets & Nozzles

 

If saving money and the environment sound like good ideas, fixing your leaky faucet and showerhead is a great place to start. The Environmental Protection Agency estimates that the weekly water waste for the average family is 180 gallons.

Check your faucet handles for leaks before turning off the water. Additionally, you want to look for leaks coming from showerheads and behind sinks. All of these could indicate a corroded valve, a worn washer, or a degraded O-ring.

Seasonal Changes

In the summer, outdoor spigots, pool lines, and sprinkler systems are free-flowing, but if they aren’t prepared for the winter, they might stop your plumbing in its tracks.

Put insulating outside fixtures and turning off their outdoor water supply on your list of preventative maintenance tasks to complete before it gets cold. Before the landscaping becomes dormant, you might need to perform a thorough sprinkler winterization.

Under Stress

Verify the water pressure gauge in your house. If it is set too high, your plumbing system will encounter increased pressure.

Make sure your regulator is functioning properly to keep your pressure under control.

Misplaced Caulk

Because it creates a waterproof barrier for your bathroom’s walls and flooring, caulking is crucial. A lack of caulk can allow moisture and water to infiltrate behind your walls and into your floorboards, producing the ideal conditions for mold and mildew.

Check the tiles surrounding your sink, shower, and tub for caulk that is missing or has degraded. Using DIY caulking tubes and guns, repairs and replacements are easy.

Contact commercial plumber Melbourne if you have any plumbing-related problems.

If you want to clear blocked drains in Melbourne, you can visit our website, fill out the form or call us at 1300777877!