The winters can, sometimes, be a bit harsh in Melbourne. Additionally, if it drops below a minimum level, there are hight chances that your pipes may explode. A burst pipe is never a good condition to have, but it does occur occasionally.

So, if you find yourself in such a situation, what should you do?

The effect of a burst pipe that lasts the longest is water damage, therefore you want to limit it as much as you can. You may take a few critical steps to halt flooding while you wait for an emergency plumber to arrive, even though we advise leaving the pipe repair to a qualified plumber:

• Activate the main shutoff valve to stop the water flow

• Make an immediate call to a plumber in need

• Open up the nearby taps

• Clean up as much water as you can

In order to help you take control of the situation as soon as possible, we’ll go into greater depth about each of these measures below.

• Water should be turned off at the main shutoff valve.

Locate your main water shut-off valve in case of a burst pipe.

Shut off the main water valve to the house as soon as you observe water coming from the burst pipe. By doing this, the pipe won’t let out any more water. Normal locations for the main shut-off valve are the water metre or the point where the main line enters the house.

Additionally, you should cut off the electricity to prevent high voltage shocks. If the burst pipe is in a space containing electrical outlets, the breaker panel, or other electrical devices, anyone wading through the water could be electrocuted.

• Make an immediate call to a plumber in need.

It’s time to hire a commercial plumber in Melbourne to fix or replace the pipe now that you have a handle on the immediate situation.

• Open up the nearby taps.

It may seem counterproductive, but opening your tap in the event of a burst pipe is crucial.

Pressure increases are frequently the cause of pipes bursting. This can occur during the winter when water inside a pipe freezes, expands, and then continues to freeze, raising the water pressure between the ice blockage and the closed tap at the end.

You can release the pressure by opening the taps in order to avoid any more issues. You’ll let any water that is still inside of them to leak out by doing this. Until the plumber shows up and finishes any required repairs, make sure to keep the taps open.

Avoid attempting to patch the pipe with short-term fixes. Even if you believe you are capable of doing the task, it is best to leave pipe repair to qualified plumbers because a botched DIY project can result in more pipe issues, water damage, and higher repair expenses. A skilled commercial plumber in Melbourne will have the skills, equipment, and expertise necessary to complete the work correctly the first time.

• Clean up as much water as you can.

A broken pipe might swiftly release a large amount of water into your house. It is best to get rid of as much water from your house as you can while you wait for the plumber to show up. By doing this, you can stop the growth of mould, mildew, and water damage.

Cleaning up after flooding could take a long time, depending on how bad it was. However, in general, you should adhere to the following basic steps:

1. Snap pictures and video of any damage right away. Any supporting documentation will probably be useful if you have to submit an insurance claim.
2. Move the furniture and personal possessions to a dry location.
3. To get rid of standing water, use a wet/dry shop vacuum. Just keep in mind to drain the storage tank frequently to prevent overflow. If you don’t have a shop vac, gather the water with buckets and empty it outside. The water can be absorbed using a mop, towels, or sponges, and then dumped outside.
4. Once you’ve gotten rid of all the water you can, the following step is to dry the area. In a pinch, you can use personal fans and dehumidifiers, but for the best results, it’s recommended that you rent commercial-grade equipment.
5. Increase the heat if you’re still utilising the electricity in your home. This will lessen potential water damage and aid in drying the area.
6. Depending on the severity of the damage, you might need to remove damaged drywall, carpets, or other items from your house once everything has dried.

There might be  high chances of blocked drains in your home, and your search engines might have search histories like, “drain plumbers near me”, or “blocked drain plumbers near me”. But instead of so much research, you may simply contact us. Our emergency plumbers at Locality Plumbing will help you fix the burst pipe as soon as they can. Typically, this entails removing the burst portion, installing a fresh copper pipe sleeve, and securely soldering it in place.

• How to Avoid Freezing Pipes

Nobody wants to experience a burst pipe more than once. The following advice could assist in avoiding future issues with broken pipes, more specifically in winters:

1. In cold climates, insulate the pipes.
2. Leave your taps seeping if the temperature falls below 20 degrees Fahrenheit to keep water flowing through the pipes.
3. To stop heat from escaping your home, keep the garage door closed.
4. Set your thermostat to at least 55 degrees Fahrenheit if you’re going on vacation.
5. If you haven’t already, you should maintain the contact information of a reputable emergency plumber handy in case this scenario ever occurs.
6. Identify the locations of your water main shut-off valves.

Need a Quick Pipe Repair from a Reliable Plumber in Melbourne? Speak with Locality Plumbing.

Contact Locality Plumbing online or by phone at (Insert contact info) and will get to you as quickly as we can. In addition to having the quickest response times in Melbourne, we also provide extended service hours.

Every plumber at Locality Plumbing  has extensive training and experience to deliver the best pipe replacement or repair services. You won’t have to be concerned about leaks returning in this manner.