Did you realize that simply heating your water uses more than 30% of the energy in your home? Almost every other domestic operation uses more energy than simply boiling the water. You’ll feel it even more if your water heater’s efficiency is subpar given the hefty prices. A stormwater plumber can help in that case. 

Ineffective water heaters don’t function as well as they should, which increases your monthly costs. It’s a lose-lose circumstance that might get worse in the future. Fortunately, there are a few tried-and-true methods to raise the effectiveness of your water heater. Here are five quick projects that will improve the efficiency of your water heater and help you save money.

Remove the Water Heater Sediment

Calcium and magnesium minerals build up over time in the water heater’s tank. Silt eventually develops as these minerals harden at the tank’s bottom. Your tank’s sediment buildup may need your heating system to work harder to heat the water. The added effort gradually puts the tank under pressure, which might result in overheating or even breakage. The best way to remove sediment from your water heater is to completely empty the tank and rinse it out with cold water at least once a year.

By removing sediments, you may improve the efficiency of your heater and avoid more expensive repairs that may be required as a result of their development. For bigger water heater repair, call hot water plumber melbourne and employ a professional to complete it for you.

Thermize water pipes

Heat dissipates easily, especially in your water tank and pipes. This is normal, but it also makes it difficult for your water heater to heat water as well as it might. You have to heat extra water to make up for the heat that is lost through your pipes. Your water heater uses more energy and runs longer and harder as you heat more water. This increases the amount of money you pay on your electric bill. Water pipe insulation improves efficiency and reduces heat loss.

Heat is kept confined inside the system where it belongs when you insulate your pipes. Insulated water pipes can even increase the temperature of the water on their own. You can even contribute by insulating your cold water lines!

If you do a little homework, insulating your pipes and water heater is a fairly simple task. With some equipment you already have at home, like as scissors, a tape measure, duct tape, and gloves, just choose some insulation material, measure your pipes, and get started. 

Use low-flow lighting

Another simple and time- and effort-free strategy to save money over the long run is to use low flow plumbing fittings. Low flow fixtures accomplish exactly what their name implies; they lower the water flow rate to prevent as much of your valuable hot water from being wastedly flushed down the drain.

Consider switching to low flow alternatives for shower heads, faucets, and even toilets to get the greatest energy savings by lowering water consumption. Even if you have someone in your home who is infamous for taking long, hot showers, they are slightly more expensive up front but are well worth the savings in the long term.

Set the temperature of your water heater 

Every water heater comes equipped with a built-in thermostat, which many homeowners are unaware of. The amount of heat required to warm the water in the tank is indicated by this thermostat. Your system will operate longer and use more energy overall as it heats water to a higher temperature. 

Check your water heater’s thermostat setting if the hot water looks dangerously hot or heats up quickly. The thermostat for your water can be lowered to keep it safe while also saving you money. Never set your water heater temperature lower than 120 degrees since experts agree that anything below that range increases the likelihood that germs will grow in the water in the settling tank.

Eliminate Plumbing Leaks

It’s more common than you might imagine for pipes to leak. Additionally, they have a bigger impact on your house than you might think. 1000 gallons of water are lost annually by even the smallest faucet leaks. Your water heater is also impacted by all that wasted water. Your water heater has to work harder to produce as more hot water leaks out of your pipes. That implies that it is operating longer and consuming more energy. The most typical sign of a plumbing leak is a water heater that is always running to make up for lost hot water.

Your water heater’s leaks frequently begin on the device itself. Start by looking for any obvious leaks near the tank of your water heater. Particularly likely causes include the drain valve and temperature-pressure relief valve. The temperature-pressure relief valve can be malfunctioning or it might leak to release pressure as it should. The water pipes themselves should also be examined, particularly those close to fixtures like sinks and showers.

When there doesn’t seem to be anything wrong with your water heater, it’s simple to forget about it. We advise keeping your heater as efficient and well-maintained as possible even if there are no obvious leaks or problems. If any kind of problem with the heater arises, call Melbourne emergency plumbers. You’ll save money on your water bill right away, and it’ll also help your water heater last longer overall.

If you want to clear blocked drains in Melbourne, you can visit our website, fill out the form or call us at 1300777877!