Imagine it’s a July Monday morning in Melbourne, and you are getting out of your warm bed to start your workweek.

After turning on the shower and stepping away to let it warm up, you return, get in, and experience the shock of the day – very cold water.

You’re stuck because the water heater isn’t working, and don’t know what to do.

Don’t panic, though you might. But don’t!

It’s hardly the best way to start the day, but it frequently happens when a water heater breaks down.

The best course of action is to make a call to a nearby drain plumber so you may carry on with your day. Take out your phone or laptop and start searching “Drain plumbers near me.”

Knowing what to look for can also help you explain the issue clearly to the plumbers, or even better, you might be able to resolve it on your own.

It is vital to know your hot water tank’s age, size, and vent type before hiring a plumber to talk about your problems. Otherwise, you’ll have to consult all the hot water plumbers in Melbourne and still have no repairs done.

Top 5 issues that you can have with hot water heaters

There are a variety of reasons why a hot water heater cannot be functioning.

Knowing how to solve the problem, or at the very least how to explain it to a qualified plumber, is crucial.

In the best-case situation, a broken pilot light is all that is required to fix a broken water heater.

If that’s the case, the problem might be resolved by just lighting it again. If it doesn’t, we’ll have to conduct a bit more research.

• Issues with Water Temperature

We frequently have problems with water temperature, which is one of the most frequent causes of water heater problems.

Either the water is heating up too slowly, or it is much too hot.

Most of the time, all you have to do is go to the water tank and turn the thermostat there. It might have been accidentally bumped, changing the temperature.

Another typical approach to reduce energy use in the summer is to lower the temperature of the water tank. Your temperature problem can be resolved by turning up the thermostat’s setting throughout the winter.

Without the right equipment and training, attempting to resolve these problems on your own could result in physical harm to you or others, further harm to the devices, or even damage to your house.

More significantly, it may cause natural gas to leak into the home, putting you and your family in grave danger. So it’s always better to be cautious and call an efficient plumber in Melbourne to get the issue resolved.

• Smelly/Discolored Water

Water that is odorous or discoloured is another issue we frequently encounter with water heaters. You need to ask the following questions to diagnose correctly:

• Has this been occurring recently?
• Does this water come from every faucet in the house?
• Have you recently used the restroom?
• After running the water for a bit, does the issue go away?
• Does this issue affect both the hot and cold taps?

You can more easily address the problem’s core cause by responding to these questions.

Discoloration

If the problem is discolored water, excessive mineral concentrations, such as those of iron and copper, are probably to blame since they cause the pipes to corrode.

The installation of a water softener system in your home is probably the best remedy for this. And what’s better than a drain plumber doing this for you?

Scale accumulates in the system, forming deposits of “lime” that can clog pipes, disrupt the operation of the water heater, washing machine, and dishwasher, as well as obstruct the flow of water in shower heads and faucets.

Installing a whole-house water filter or even a water softener will quickly resolve these problems.

Odors of Strong Water

There are a number of potential causes for the intense water odours coming from the tap. Running the hot water for a few minutes will confirm your suspicions if you think the problem is with the hot water tank. The presence of bacteria in the water tank may be the cause of water that smells like rotten eggs or sewage.

Your initial course of action should be to completely flush the water tank if this occurs. If it doesn’t work, it may be necessary to replace the corroded anode rod.

Finally, if the smell is particularly overpowering, there might be a problem with the gas line. When this occurs, you must turn off the appliance, ventilate the room before leaving, and contact the gas utility company and a hot water heater repair plumber.

• Making Noises From The Water Heater

A water heater’s noise might be caused by a variety of factors. The noise we hear may be the result of excessive mineral and sediment building, similar to what causes the water to become discoloured.

The buildup may result from the heating element’s burning of the sediment, or it may mean that the heating element needs to be changed. It can progressively burn out and start making noises as it starts to decay.

If you hear a boiling sound, this is the sound of the appliance overheating and creating an unsafe buildup of pressure. Make a quick call to a professional plumber in this situation. Or you can directly reach out to Locality Plumbing’s helpline to get your water heater repaired by the best plumbers in Melbourne.

• Water Heater Leaks

Your water heater may be leaking if you’ve observed a decline in water temperature. It’s crucial to identify the leak’s origin and cause before trying to fix it. Some of the reasons might be:

• Age
• Poorly installed plumbing
• Poorly maintained
• Unsecured drain valve
• The pressure inside the tank

A leak may be highly noticeable if water collects close to the appliance or is dripping from pipes leading to it. If a valve is loose, it is simple to tighten it or replace it on your own. You’ll need to replace the water tank if it has corroded.

• Burner or gas control assembly damage

A broken gas control or burner is another typical indicator of a broken water heater. If the burner is unclean or inoperable, the water heater cannot function properly, and the water will not heat up.

The damaged gas control or burner assembly, sometimes referred to as a thermocouple, needs to be replaced.

If you try to restart the pilot light and none of the other problems listed above seem to apply, it can be as easy as changing the thermocouple. To prevent further damage, you must first cut off the gas and the water before replacing the thermocouple.

Call a professional to do the task properly if you are unsure. You might be thinking, “where can I find the most professional drain plumbers near me.” And the answer is – Locality Plumbing!

A New Hot Water Tank Is Needed? Talk To Locality Plumbing.

Sometimes there is no simple solution, and problems with the hot water tank are simply the result of needing a whole new unit.

A skilled installer is required since installing a new water tank is not a simple task. And we are here for you.

If you want to clear blocked drains in Melbourne, you can visit our website, fill out the form or call us at 1300777877.