We all have some things in common, one of them being that we don’t know the value of something until it is gone. The same applies to our water heaters too. Those poor beings give us their all and make us sail through those cruel chilly winters. But we ignore even the telltale and warning signs that our water heater is going to fail.

From washing the dishes to taking a hot shower, you need your water heater the whole day. So it’s better to pay attention to the warning signs the water heating machine gives before going on the fritz. It saves your time, money, energy and, of course, a lot of headaches you will have while looking for Melbourne Emergency Plumbers. And you would definitely not want your hot water to suddenly turn into the ice while taking a shower on a hectic day.

So here we are providing you with some signs that your water heater might need some repair. Read below to know more.

• The water isn’t as hot as it used to be

When you notice that the water is not getting as hot from your taps or showers, your ears must perk up that something is not quite well with your water heater. One of the reasons for the heating issues might be the building up of sediments at the bottom of the tank. This makes the heating element far less effective by insulating them from water.

You might go for the flushing of the tank; it is a process where the sediments are eliminated to make the heater work properly. And in case you feel you can’t get rid of this problem, you can definitely resort to our team of experts anytime.

• The hot water supply isn’t enough

Your water heater is designed to store a lot of water in it, but if you feel the hot water supply doesn’t last long, it is another warning sign. Although there might be a lot of reasons for it, the most prevalent is issues with the heating element. When this element becomes faulty, some of the water resting inside will not be heated and run out of the tap, giving the user shivers with its coldness.

And no one wants to be in this terrible situation, right? 

• Fluctuations in water temperature

Another warning sign your heating device gives you is inconsistent temperatures of water coming out of the taps or showers. This might indicate towards a problem with the thermostat or heating element. Another reason might be the accumulation of mineral deposits inside. However, if you have programmed your thermostat at a fixed level, it should stay at there ideally. But if this situation persists for longer, you might need a bigger tank. 

Nevertheless, you should call a hot water plumber in Melbourne to resolve the issue quickly.

• Reduced or low water pressure

Low water pressure is another warning that your water heater might need some repair. There might be several reasons for the same, but if the pressure is lower when turning on the hot water tap, then the reason might be the disposition of sediments in your water heater tank. 

You might be making online searches like “drain plumbers near me” or “water heater plumbers near me”, but instead, you could call our team of experts directly to fix your water heating problem.

• Leakage in water heater

Water leaks prove to be quite damaging for your house and if it’s the leakage in your water heater, then it’s even worse. Since the heater tanks require a continuous supply of water for heating it up and storing it in. There might be many probable causes for the same, including a faulty connection of hot or cold water, loose gaskets, or corrosion in the water tank, to name a few. 

Ideally, this issue can be resolved with simple and easy repair work. But if you leave the leak unnoticed, it might lead to a serious issue. You might be required to either replace your water heater or make repairs to everything it has damaged.

• Water heater making strange noises

As a part of their proper functioning, the water heater normally makes some noise while the whole heating process. But you should take note when it’s making unusual noises since your machine might be having some issues. 

A rumbling or banging sound could indicate a sediment buildup in the tank. This sediment needs to be flushed, and additionally, you could also replace your anode rod. A popping sound might also be due to the sediment.

A crackling or hissing sound might be due to the moisture buildup if you are using a gas heater. If the heater is electric, it might indicate an obstruction to the heating element. In this situation, you should drain the tank or call a drain plumber nearby.

A high-pitched or screeching sound might point towards pressure adjustments in the tank. You might check the pressure valves by yourself or simply call a hot water plumber.

• The water stinks!

If the water is making a foul smell or is stinking, you should immediately resort to a professional to resolve the problem. Since the sulfur bacteria is fond of the warm and wet conditions of a water heater tank, chances are there that this bacteria has nestled in your tank.

Doing the solution yourself might be a bit tricky, since you will be tempted to raise the temperature a bit higher instead of killing the bacteria. You may also want to replace the magnesium anode with that of the aluminium one since it is said to allow lesser production of bacteria.

Do you have any of these warning signs?

If yes, then fret not! Our team of experts is there to save you from any trouble you might have due to your water heater. You just pay heed to the warning signs that your heater is giving to you and the rest is on us. To your amazement, most of these issues don’t require your water heater to get replaced.

If you want to clear blocked drains in Melbourne, you can visit our website, fill out the form or call us at 1300777877!